• Super Clear Epoxy Two Component Adhesive for Deco
  • Super Clear Epoxy Two Component Adhesive for Deco
  • Super Clear Epoxy Two Component Adhesive for Deco
  • Super Clear Epoxy Two Component Adhesive for Deco
  • Super Clear Epoxy Two Component Adhesive for Deco
  • Super Clear Epoxy Two Component Adhesive for Deco

Super Clear Epoxy Two Component Adhesive for Deco

Bonding Function: Structural Adhesive
Morphology: Water Emulsion
Application: Coating, Decoration
Material: Epoxy
Classification: Room Curing
Main Agent Composition: Thermosetting Resin
Customization:

Contact Supplier

Gold Member Since 2014

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
312AB-8
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Hardness
86
Mixing Ratio
3:1
Curing Time
8-10h at Room Temperture
Transport Package
5kg/Pkg
Specification
ROHS, REACH, CPSIA, PAHS
Trademark
jinhua glue
Origin
China
HS Code
3506912000
Production Capacity
100000kgs/Month

Product Description

Epoxy Resin 312AB-8
Feature
Epoxy resin 312AB-8 can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transprancy, no ripple, bright in surface, it can be cured at room temperature or high temperature..
 
Application
312AB-8 can be widely used for high quality LED channel letter, photo frame, drops of glue, signs, cards, crafts, lamp potting and mould filling, etc..
 
Properties before Hardening
Part 312A-8 312B-8
Color Transparent Transparent
Specific gravity 1.15 0.96
Viscosity (25ºC) 2000-4000CPS 100 MAXCPS
Mixing ratio  A: B = 100:33(weight ratio)
Hardening conditions 25 ºC×8H to 10H or 55ºC×1.5H (2 g)
Usable  time 25ºC×40min (100g)
 
Operation 
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
 
Properties after Hardening
Hardnessshore D <85
Withstand voltageKV/mm 22
Flexural strengthKg/mm2 28
Volume resistivityOhm3 1x1015
Surface resistanceOhmm2 5X1015
Thermal conductivityW/M.K 1.36
Induced electric loss1KHZ 0.42
Withstand high temperatureºC 80
Moisture absorption % <0.15
Compressive strengthKg/ mm2 8.4
 
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use. 
2Avoid eye contact in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake. 
  
Storage And Shelf Life
1, Store at the tempeture of 25°C or cool and dry place.  Avoid from sunlight, high tempeture or hign humidity enviroment. 
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of 25°C

 
Free Sample is Available!
Super Clear Epoxy Two Component Adhesive for Deco
Super Clear Epoxy Two Component Adhesive for Deco
Super Clear Epoxy Two Component Adhesive for Deco

Send your message to this supplier

*From:
*To:
avatar Ms. Kerry Jin
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now