| Customization: | Available |
|---|---|
| CAS No.: | 3506912000 |
| Formula: | 38891-59-7 |
|
Still deciding? Get samples of US$ 4/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Epoxy resin can be cured under normal temperature, with the feature of low viscosity and good flowing property, natural defoaming, antiyellow, high transpareny , no ripple, bright in surface..It is an eco-friendly material without odour , easy to clean and operate .water and dust proof . Special sructure and high density of the 3D floor tiles standard size surface, make it more astringent when come acorss water.
Certificate
Application fields: Healthcare, Hotels, Education, Leisure, Multi-purpose Gym, Office, Retail, industry, Public area, Residential, Retirement homes, Sport club, Sport events,Sport shop, Fitness…
It is widely used in: photo frame coating, crystal flooring coating, hand made jewelry, and mold filling, etc...
Product Gallery
Properties before Hardening
|
Part |
A |
B |
|
Color |
Transparent |
Transparent |
|
Specific gravity |
1.15 |
0.97 |
|
Viscosity (25) |
2000-4000CPS |
100 MAXCPS |
|
Mixing ratio |
A: B = 100:33(weight ratio) |
|
|
Hardening conditions |
25 ×8H to 10H or 55×1.5H (2 g) |
|
|
Usable time |
25×40min (100g) |
|
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 , please heat A glue to 30 first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
|
Hardness, shore D |
<86 |
|
Withstand voltage, KV/mm |
22 |
|
Flexural strength, Kg/mm2 |
28 |
|
Volume resistivity, Ohm3 |
1x1015 |
|
Surface resistance, Ohmm2 |
5X1015 |
|
Thermal conductivity, W/M.K |
1.36 |
|
Induced electric loss, 1KHZ |
0.42 |
|
Withstand high temperature, |
80 |
|
Moisture absorption, % |
<0.15 |
|
Compressive strength, Kg/ mm2 |
8.4 |
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C degree.
5kgs per bottle; 20kgs per carton
20kgs per barrel
200kgs per barrel
){kind=link}