| Customization: | Available |
|---|---|
| CAS No.: | 3506912000 |
| Formula: | 25068-38-6 |
|
Still deciding? Get samples of US$ 4/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Feature
Epoxy resin can be cured under normal temperature and high temperature, with the
feature of good flowing property, low viscosity, very little heat release, natural defoaming, anti- yellow, high transparency, no ripple, bright in surface.
Application
specially designed for large size wood table casting, lamp potting and mold filling, etc..
|
Part |
A |
B |
|
Color |
Transparent |
Transparent |
|
Specific gravity |
1.15 |
0.97 |
|
Viscosity (25) |
2000-4000CPS |
50 MAXCPS |
|
Mixing ratio |
A: B = 100:33(weight ratio) |
|
|
Hardening conditions |
25 ×24H-48H (100 g) |
|
|
Usable time |
25×120min (100g) |
|
|
Hardness, shore D |
<86 |
|
Withstand voltage, KV/mm |
22 |
|
Flexural strength, Kg/mm2 |
28 |
|
Volume resistivity, Ohm3 |
1x1015 |
|
Surface resistance, Ohmm2 |
5X1015 |
|
Thermal conductivity, W/M.K |
1.36 |
|
Induced electric loss, 1KHZ |
0.42 |
|
Withstand high temperature, |
80 |
|
Moisture absorption, % |
<0.15 |
|
Compressive strength, Kg/ mm2 |
8.4 |
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 , please heat A glue to 30 first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap. 4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six monthsin the room temperature of 25°C.
Product Gallery
IF YOU WANT FREE SAMPLE, PLS PRESS HERE.
Production plant
factory of 3500sqm, all the materials are offered by factory directly
Packaging & Shipping
FREE SAMPLE IS AVAILABLE!!!
Certificate
FAQ
1, Why Choose Jinhua glue?
1) Jinhuaglue owns ISO9001-2008 audited factroy of 3500sqm, all the materials are offered by factory directly.
2) Jinhua has R&D team, we accept OEM, and small order is acceptable
3) Jinhua has already ship to over 30 countrys, aboudant experiecnce on the exporting.
4) Jinhua with output of tons per day, ensure the fast on time delivery
5) Jinhua keeps all the samples for each shipment, so that to make the quality trackable.
2, Do Jinhua has MSDS for shipment?
Yes, we do have MSDS for shipment all all our epoxy and PU resin
){kind=link}