Clear Soft Epoxy Resin for Keychain Coating

• CAS No.: 25068-38-6
• Bonding Function: Structural Adhesive
• Morphology: Liquid
• Application: Construction
• Material: Epoxy
• Classification: Room Curing
• Model NO.: 608AB
• Main Agent Composition: Thermosetting Resin
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Colorless,Transparent
• Shelf Life: 6 Months
• Mixing Ratio: 2:1
• Curing Time: 10-12 Hours
• Transport Package: 20kgs
• Specification: SGS, ROHS, STC
• Trademark: Jinhua glue
• Origin: China
• HS Code: 3506912000
• Production Capacity: 10 Ton /Day

Product Description

Feature
Epoxy resin 608AB can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, high transparency.

Application
608AB can be widely used for drops of glue, stickers, cards, crafts, lighting, lamp potting and mold filling, etc..

Detailed information

Model 608AB	Main agent 608A	Curing agent 608B
Properties before Hardening
Color	Colorless transparent	Colorless transparent
Specific gravity	1.15	1.15
Viscosity(25ºC)	700-1500CPS	100MAXCPS
Conditions of Usage
Mixing ratio	A: B = 100: 50(weight ratio)-->2: 1
Hardening conditions	25 ºC×10H to 12H or 55ºC×2H (2 g)
Usable time	25ºC×40min (100g)
Properties after Hardening
Hardness, shore D	<
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	25
Volume resistivity, Ohm3	1x1015
Surface resistance, Ohmm	2 5X1015
Thermal conductivity, W/M.K	0.59

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.


Below is some factory photo for your reference.






Free samples are available! Please contact us for more details and tell us what you need!