Super Transparency Epoxy Resin for Surfboard Coating

• Customization: Available
• CAS No.: 25068-38-6
• Bonding Function: Coating
• Model NO.: 2120AB-1
• Morphology: Liquid
• Application: Construction
• Material: Epoxy
• Classification: Room Curing
• Main Agent Composition: Thermosetting Resin
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Transparent
• Shelf Life: 6 Months
• Mixing Rate: 2:1
• Package: 5kgs 20kgs
• MOQ: 15kgs
• Transport Package: 15kg/Set, Carton
• Specification: SGS, ROHS, STC
• Trademark: Jinhua glue
• Origin: China
• HS Code: 3506912000
• Production Capacity: 100 Ton Per Year

Product Description

Feature
Epoxy resin 2120AB-1 can be cured under normal temperature, two components system hard resin, natural defoaming, yellow resistance, high transparency, bright in surface, it can be also cured at high temperature for faster curing.

Application
2120AB-1 can be widely used for surfboard coating, carbon fiber products coating, fiberglass laminating, snowboard coating, paddle coating, boat, lamp potting and mold filling, etc

Detailed information

Model 2120AB-1	Main agent 2120A-1	Curing agent 2120B-1
Properties before Hardening
Color	Colorless transparent	Colorless transparent
Specific gravity	1.15	0.96
Viscosity(25ºC)	6000-10000CPS	250MAXCPS
Conditions of Usage
Mixing ratio	A: B = 100: 50(weight ratio)-->2: 1
Hardening conditions	25° C× 2H to 4H or 55° C× 1.5H (2 g)
Usable time	25° C× 15min (100g)
Properties after Hardening
Hardness, shore D	<90
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	25
Volume resistivity, Ohm3	1x1015
Surface resistance, Ohmm	2 5X1015
Thermal conductivity, W/M.K	0.59

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.


Caution
1.The operating environment should be ventilate and should keep away from fire. Closely sealed after use.
2. Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3. If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4. Keep away from children.
5. Please take a trial before application to avoid usage mistake.

Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.

Below is some factory photo for your reference.




Free samples are available! Please contact us for more details and tell us what you need!




Certifications