2018 Design High Transparent Liquid Non-Toxic 3D PVC Epoxy Floor Paint

• Customization: Available
• Color: Colorless, Transparent
• Appearance: Liquid
• Model NO.: 113AB-2
• Method: Brush
• Level: Top Coat
• Drying Method: Normal Temperture, Heating Temperature
• Certification: RoHS, Reach
• Substrate: Glass
• Components: Pigment
• Formation Mechanism: Mixture
• Product Name: 3D Clear Floor Coat
• Material: Epoxy Resin and Hardener
• Model: 113ab-1
• Ratio: 3:1
• Rigidity: 80
• Hardening Conditions: 25 ºC*8h to 10h or 55ºC*2h (2 G)
• Certificate: SGS, Reach, RoHS
• Shelf Life: 6 Months
• Packing: 5kgs/Bottle
• Feautures: Natural Defoaming Feature, Good Flowing Property
• Transport Package: Carton
• Specification: 37*28*30
• Trademark: JH
• Origin: Guangdong, China
• HS Code: 3506912000
• Production Capacity: 50000kg/Month

Product Description

Part ( 113AB-2)	A	B
Color	Clear	Clear
Viscosity (25ºC)	1500-4000CPS	100MAX CPS
Mixing ratio	A: B = 100:33(weight ratio)
Hardening conditions	25 ºC×8H to 10H or 55ºC×1.5H (2 g)
Usable time	25ºC×50min (100g)
Hardness, shore D	>86
Flexural strength, Mpa	28

 

Item	Kg/Sqm	Package	Ration( By weight)
JC Epoxy Primer 2111AB	0.1KG	A: 15KG S  B: 5KGS	A:B= 3:1
JC Epoxy Middle 2112AB	0.1KG	A: 25KG S B: 5KGS	A:B= 5:1
JC  Epoxy Top    2113AB	0.8KG	A: 5KG S B: 5KGS	A:B= 3:1

 

Operation Step

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.

3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing

Caution
1,The operating environment should be ventilate and should keep away from fire. Closely sealed after use. 
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake. 
  
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
 

Notice: The above data is typical data measured by the laboratory environment under
the temperature of 25 ºC, and humidity of 70%. For customers' reference only.

Detailed Photos