Transparent Outdoor Epoxy Resin for Carbon Fiber Bicycle

• Customization: Available
• CAS No.: 25068-38-6
• Bonding Function: Structural Adhesive
• Model NO.: 3323AB
• Morphology: Liquid
• Application: Construction
• Material: Epoxy
• Classification: Room Curing
• Main Agent Composition: Thermosetting Resin
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Transparent
• Shelf Life: 6 Months
• Weight Ratio: 2:1
• OEM: Available
• Transport Package: 20kgs/Set
• Specification: SGS, ROHS, STC
• Trademark: Jinhua glue
• Origin: China
• HS Code: 3506912000
• Production Capacity: 10 Ton /Day

Product Description

Feature
3323AB is a two components transparent Epoxy resin adhesive system, with the feature of low viscosity, natural defoaming, anti-yellow, high transparency, bright in surface, it can be cured at room temperature or elevated temperature. ..

Application
3323AB can be widely used for the coating of carbon fiber products, surfboard coating, covering of the car spare parts, carbon fiber composite cellphone case and so on.

Detailed information

Model 3323AB	Main agent 3323A	Curing agent 3323B
Properties before Hardening
Color	Colorless transparent	Colorless transparent
Specific gravity	1.15	0.96
Viscosity(25ºC)	2500-4500CPS	150 MAXCPS
Conditions of Usage
Mixing ratio	A: B = 100:50(weight ratio)>2:1
Hardening conditions	25 ºC×24H or 110ºC×1H (2 g)
Usable time	25ºC×50min (100g)
Properties after Hardening
Hardness, shore D	>86
Withstand voltage, KV/mm	22
Flexural strength, Mpa	75
Volume resistivity, Ω·cm	1.2x1014
Surface resistance, Ohmm	2 5X1015
Withstand high temperature, ºC	92
Moisture absorption, %	<0.15
Compressive strength, Mpa	40

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.


Caution
1,The operating environment should be ventilate and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake

Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature
or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.

Below is some factory photo for your reference.





Free samples are available! Please contact us for more details and tell us what you need!


Packing and Shipping
5kgs per bottle 
20kgs per carton 
20kgs per barrel 
200kgs per barrel