Strong Adhesive Fast Dry Epoxy for Metal/ Electronic Components

• Customization: Available
• CAS No.: 25068-38-6
• Bonding Function: Structural Adhesive
• Model NO.: 650AB
• Morphology: Liquid
• Application: Construction, Metal Bonding
• Material: Epoxy
• Classification: Room Curing
• Main Agent Composition: Thermosetting Resin
• Characteristic: Fast Dry, Strong Adhesive
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Transparent
• Shelf Life: 6 Months
• Mixing Ratio: 1:1
• Curing Time: 5mins
• Transport Package: 10kgs/Set
• Specification: SGS, ROHS, STC
• Trademark: Jinhua glue
• Origin: China
• HS Code: 3506912000
• Production Capacity: 10 Ton /Day

Product Description

Feature
Epoxy resin adhesive 650AB can be cured under normal temperature and high temperature, easy to operate, with super fast curing, high bonding strength.

Application
650AB can be widely used for adhesion for hard materials such as metal, stone, electronic components, wood, etc..

Detailed information

Model 650AB	Main agent 650A	Curing agent 650B
Properties before Hardening
Color	Colorless transparent	Colorless transparent
Specific gravity	1.15	1.05
Viscosity(25ºC)	8000-12000CPS	5500-8500 CPS
Conditions of Usage
Mixing ratio	A: B = 100:100(weight ratio)>1:1
Hardening conditions	25 ºC×5Min (2 g)
Usable time	25ºC×2min (100g)
Properties after Hardening
Hardness, shore D	<85
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	27
Volume resistivity, Ohm3	1x10^15
Surface resistance, Ohmm2	5X10^15
Thermal conductivity, W/M.K	0.56
Moisture absorption, %	<0.15
Induced electric loss, 1KHZ	0.42

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.


Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use. 
2, Avoid eye contact,  in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake. 
  
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place.  Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Below is some factory photo for your reference.






Free samples are available! Please contact us for more details and tell us what you need!