Super Clear Polyurethane Resin for 3D Wall Gel Tiles

• Customization: Available
• CAS No.: 25068-38-6
• Bonding Function: Structural Adhesive
• Model NO.: 618AB-H
• Morphology: Liquid, Transparent
• Application: Construction
• Material: Polyurethane
• Classification: Room Curing
• Main Agent Composition: Thermosetting Resin
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Clear
• Shelf Life: 6 Months
• Mixing Ratio: 1:1
• Curing Time: 12 Hours
• OEM: Available
• Transport Package: 5kgs 20kgs
• Specification: SGS, ROHS, STC
• Trademark: Jinhua glue
• Origin: China
• HS Code: 3506912000
• Production Capacity: 10 Ton /Day

Product Description

Features
1. With long pot life and fast heat curing to save time.
2.With low viscosity and good natural defoaming, come to a high gloss and bright surface after cured, without ripple.
3.Very high transparency, with good elasticity and bonding strength.
4. With very good weather and UV resistance for outdoor use, can be used at the temperature of 0 ºC to 100 ºC.
Application
618AB-H is a two components polyurethane system with the mixing ratio of 1:1, can be cured under normal temperature and high temperature, it forms a very high gloss and transparent coating to its applications such as nameplate, signage,wallstickers and decorations. It is specially designed for the applications requires a soft and flexible clear coating. After cured, it will has a very good features of UV resistance and weather resistance, can be for outdoor use, and can meet the strict requirements for car raw materials, will not yellowing for about 3 to 5 years for outdoor use.
Components
618A-H: Polyhydric alcohol                 618B-H: Isocyanate                          618AB-H can be operated both by hand and machine.
Detailed Information 

Model 618AB-H	Main agent 618A-H	Curing agent 618B-H
Properties before Hardening
Color	Transparent or Light yellow	Transparent or Light yellow
Specific gravity	1.15	0.96
Viscosity(25ºC)	145±50CPS	90±50 CPS
Conditions of Usage
Mixing ratio	A: B = 100:100(weight ratio)
Hardening conditions	25 ºC×24H or 65ºC×3.5H or 80ºC×2H
Usable time	25ºC×20min
Properties after Hardening
Hardness, shore A	70±5
Tensile strength,MPA	>2
Elongation Ratio, %	>200

Operation
1, Place 618A-H and 618B-H at the temperature of 15 to 25 ºC, relative humidity lower than 70% for 12hours.
2, Well prepared the products you need to apply the 618AB-H such as the PVC signage/nameplate, metal signage/nameplate, put them into the oven to heat at the temperature of about 60ºC to clear the moisture on the surface.
3, Totally clear the dust and the oil on the surface of the signage/nameplate.
4, Weigh the 618A-H and the618B-H by 1:1, and fully stir it.
5, Clear the bubbles by vacuum machine(the mixture will not have bubble at the -0.1 vacuum)
6, Take a clean syringe to draw the mixture and drop it to the surface of the well prepared signage/nameplate. Normally the thickness is 2mm.
7, Look at the glue in 5 minutes, if there is some bubbles, use a pin to break the bubbles, or if there is some area that has not been covered by glue, use the pin lead it.
8, Put the finished products in the oven at the temperature of about 60 to 80ºC, it will cured in 2 to 3.5 hours.
  

Storage And Shelf Life
1, Store at the temperature of 15~25°C, under the humidity of 70%. Avoid sunlight, high temperature or high humidity environment.
2, The feature of 618A-H maybe affected if contact with air, closed the618A-H tightly after used. And 618A/B-H will absorb the moisture in the air easily, strictly avoid this happens.
3, When the mixture is more than 100g, the pot lift will be much shorter.
4, This is non-hazardous chemical, can transported as normal chemicals.
5, Better to clean the water content of 618B-H by vacuum before use.

Company Profile
Shenzhen Jinhua Electronic Materials Co.,Ltd engaged in epoxy resin adhesive and the second-processing of  hardener agent since 2009, our products range covers from clear resin, hard glass like epoxy coating, epoxy flooring, epoxy potting, fast dry 2 parts epoxy, crystal epoxy decoration, soft epoxy, and resin for LED lights, crystal clear polyurethane, urethane floor, urethane potting etc, and now we are one of the most professional and competitive epoxy resin glue suppliers in China. Jinhua professional in development, production and sales of clear epoxy resin AB glue and ployurethane with the factory area of 2000 square meter. All the equipment in Jinhua are comply to advanced international technology and standard, refer to the excellent formula in domestic and from abroad, and with the high property raw material imported from America, Japan and Germany, every step of the production are with strict test, all of our products have passed RoHS, REACH, CPSIA, PAHS, EN71, make Jinhua to be the leading supplier in this field in China and gained high reputation from our customers during the past years.
Below is some factory photo for your reference.





Certificates


Free samples are available! Please contact us for more details and tell us what you need!


Packing and shipping
PE/steel bucket(5kgs/bucket or 20kgs/bucket or 200kgs bucket)